Our itf16, itf32 and itf64 interface boxes allow you to connect several devices to your computer during experiments.

itf16 has:

• 16 BNC inputs numbered 1 to 16, corresponding with each input of the AD board (installed in the computer) - these inputs are named "Input" in iox
• a 68-pin connection plug (male) for the cable going to the AD board
• a 9 pin plug (female) corresponding to TTL outputs - these outputs enable control of external devices by sending 0-5V signals (for configuration, refer to iox manual) - pin 1 is ground, pin 2 is TTL level 1, pin 3 is TTL level 2, …, pin 9 is TTL Level 8
• one BNC plug corresponding to a timer output (0-5V square wave of adjustable frequency) - this output is often used to control stimulation
• another optional BNC plug corresponding to a second timer output

itf32 has:

• 32 BNC inputs numbered 1 to 32, corresponding with each input of the AD board (installed in the computer) - these inputs are named "Input" in iox
• a 68-pin connection plug (male) for the cable going to the AD board
• a 9-pin plug (female) corresponding to TTL outputs - these outputs enable control of external devices by sending 0-5V signals (for configuration, refer to iox manual) - pin 1 is ground, pin 2 is TTL level 1, pin 3 is TTL level 2 …, pin 9 is TTL Level 8
• a BNC plug corresponding to a timer output (0-5V square wave of adjustable frequency) - this output is often used to control stimulation
• a second optional BNC plug corresponding to a second timer output
• two analog outputs

itf64 has:

• 64 BNC inputs numbered 1 to 64 corresponding with each input of the AD board (installed in the computer) - these inputs are named "Input" in iox
• a 68-pin connection plug (male) for the cable going to the AD board
• a 9-pin plug (female) corresponding to TTL outputs - these outputs enable control of external devices by sending 0-5V signals (for configuration, refer to iox manual) - pin 1 is ground, pin 2 is TTL level 1, pin 3 is TTL level 2 …, pin 9 is TTL Level 8
• a BNC plug corresponding to a timer output (0-5V square wave of adjustable frequency) - this output is often used to control stimulation
• a second optional BNC plug corresponding to a second timer output
• two analog outputs